M-Bus data logger for up to 60 M-Bus devices
• Centralized reading of all meters
• Reading by remote indication. It is not necessary to access the accommodation.
• On-site control via keyboard / LCD matrix display
• 2 Versions: 20 or 60 meters
• Operating voltage (version 20) 11…28 VDC / 13…28 VAC – (Version 60) 230 VAC (optional 110 VAC), 50/60 Hz
• Power consumption (Version 20) 5W DC / 9W AC – (Version 60) 12 W
• Temperature range 0… 55 °C
• M-Bus voltage (Version 20) 32 V (Mark, no load) – (Version 60) 39 V (Mark, without load)
• Max. M-Bus idle current (Version 20) 30 mA (20 standard loads of 1.5 mA) – (Version 60) max. 90 mA (60 standard loads) of 1.5 mA
• Max. number of M-bus addresses 240
• Reading intervals 1, 2, 3, 5, 10, 15, 20, 30 minutes / 1, 2, 3, 4, 6, 12, 24 hours 2x, 1x per week, 1x per month / 4x, 2x, 1x per year
• Overcurrent threshold (Version 20) 60 mA – (Version 60) 140 mA
• Internal bus resistance (Version 20) approx. 100 Ω – (Version 60) approx. 15 Ω
• Transmission rate 300… 9’600 bauds
• Galvanic isolation (Version 20) no – (Version 60) present
• Light grey plastic housing (Version 20) IP 40, 58 x 106 x 96 mm, for DIN rail mounting EN50022 TS35 (Version 60) IP 52, 71 x 165 x 175 mm, wall mounting, sealable
• LED status display
• Operating elements 4-key keypad, LCD display with 2 lines of 16 characters each
• RS-232 plug-in terminals as 9-pin DSUB sockets
• Data logger (Version 20) At least 2000 telegrams (distributed over the number of counters) –
(Version 60) At least 4000 telegrams (distributed over the number of counters), standard 1 MB, optional 2 MB or 4 MB
© 2020 Integra
Lorem ipsum dolor sit